The ventilator offered in this category is NEOCARE. The newly born babies have been given prime consideration while designing the ventilator. Utmost safety features have been provided for treating such delicate patients.
It is an electronically controlled ventilator based on the widely accepted technique of continuous flow and pressure control modes. There is an option to select the inspiratory and expiratory flow separately. Both volume and pressure limiting features have been added to reduce the possibilities of Volume Trauma or Barotrauma. The sensing device at the proximal to the patient gives quick response and sensitive triggering. Both the pressure and the flow triggering are available. The use of Closed feedback system has made the control of ventilation very accurate. The provision of independent CPAP Mode makes the device very versatile.
FEATURES
Large LCD display
Both Volume & Pressure Limiting System
Pressure Control Ventilation
Apnea backup ventilation
Servo controlled FiO2
Monitoring of patient data
Both flow and pressure triggering
Automatic calibration of Oxygen sensor
Alarm Log
SPECIFICATION:-
LCD Display | 12.1 inches coloured TFT |
Modes | AC, SIMV/IMV, CPAP with backup ventilation & Standby |
PCV | 0 to 40 cmH2O |
Flow | 2 to 25 LPM |
Frequency | 1 to 150 breaths per minute |
Inspiratory time | 0. 2 to 3. 0 seconds |
Triggering | Flow triggering :1to10 LPM & Pressure Triggering : 0.5 to 8 cmH2O |
Exp. pressure | 0 to 20 cmH2O |
Insp. Pressure limit | 5 to 50 cmH2O |
Tidal Volume | 6 to 300 ml |
I : E ratio | 1:1 to 1:10 (AC ), 1:1 to 1:60 (SIMV); Inverse 1:1 to 4:1 |
Safety Pressure Relief | 15 to 50 cmH2O |
Alarm mute | 30 seconds |
Alarms | High/Low Insp. Pressure, High/Low Tidal Vol, High/Low FiO2, Gas Failure, Apnea |